Synopsis 【Released August 26, 2019 by uncutdata data recovery】
When I Cut SD Card Files To The Computer It Suddenly Crashed.How To Recover It?
Cut and paste is a simple operation to move the specified file to the target location. However when the cut file has not been pasted to the right location, if the computer suddenly turn off, the screen goes black, or other unexpected problems, it will lead to the loss of files. You can not retrieve the files in the original location or the designated location .
"I copied a very important document from my office and put it on the SD card, ready to go home and save it to the computer. But for convenience, I cut the document directly and prepared to paste it to the computer. But then the computer suddenly crashed. When I opened the computer again, the document was not on the SD card or the computer. It disappeared! How to solve such a problem?"
This is very unfortunate. Have you ever encountered such a problem? If so, you can read this article. Next, I'll show you how to recover the files lost during cut and paste.
Solution 1: Retrieve lost files in the clipboard
Please note that the files you lost when cutting will not be in your recycle bin. The quickest way is to look at your clipboard.
Clipboard is a memory space in Windows system that can store the information continuously. It is used to temporarily store and exchange information. It is built in windows and uses the internal resource RAM of the system or virtual memory to store cut and copied data. There are many kinds of information that can be stored.
However, the disadvantage is that the clipboard can only retain one piece of data. Whenever the new data come in, the old will be covered. And if you're not using Windows system which doesn’t support this function, you can't retrieve files in this way.
But you don't have to worry about it. The next method will surely meet all your needs.
Solution 2: Use UnCutData Recovery Wizard Free to Restore files
UnCutData Recovery Wizard Free is an integrated free data recovery software for different loss situations. Through a few simple steps, it can efficiently and quickly help you recover files lost during cut and paste.
Now let UnCutData Recovery Wizard Free show you how it can help you find the files you lost during cut and paste through the following steps.
Step 1: Select the format of the missing data
First, please open UnCutData Recovery Wizard Free, then you can see the data format selection interface.
There are two lines of icons representing the file format in the interface. Please look carefully to distinguish them. What you need to do is to select the file format. Please check the second icon from the left of the first line.
When the check is completed, a small circle with a check will appear in the lower right corner of the icon. Then you can click the "Next" button on the right, as shown in Figure 3.
Step 2: Select the disk where the file was originally located
Now you can see the interface for selecting the disk. Next, you need to select the disk where the file you lost was originally located.
If your file is lost from SD card, please select your SD card. After selection, a small circle with a check mark appears at the right end of the row of disk name. Then you can click the "Scan" button on the top right to scan your SD card, as shown in Figure 4.
Disk scanning process
The scanning process takes a certain amount of time. The length of time is determined by the files stored on your SD card. The more complex file type and the larger file size will take the longer scanning time, and vice versa, as shown in Figure 5.
Normally, if your SD card has about 2GB files in document format, it only takes a few seconds to complete the whole scan. Please wait patiently.
Step 3: Select the file you lost to restore
After the scan is completed, all the scanned files on SD card will be listed in the left column of the interface. You can browse them.
Now you need to browse rank by rank, then find the document you lost during cut and paste and select it. Click on the "Restore" button in the upper right corner, as shown in Figure 6.
If you don't find the document you lost during cut and paste after scanning, don't worry. UnCutData Recovery Wizard Free offers two scanning modes, one is the quick scan, which has the advantage of high speed. But some deep files may not be scanned.
However, there is a deep scan help to help you solve the problem of not retrieving files, but it takes a little longer. Then please click on the "deep scan" button of yellow font at the top of the interface. UnCutData Recovery Wizard Free will scan deeply for you immediately. Please wait patiently again, as shown in Figure 7.
After the deep scan is completed, find the document you lost. Select and click the "Restore" button. Then your document will be restored, as shown in the figure below.
Tips: It is recommended that when scanning lost files, you first do a quick scan and then a deep scan. Especially when you scan the complex files on disk, you can do like this to achieve the best recovery effect.
Through the three simple steps provided by UnCutData Recovery Wizard Free, the cut files lost on your SD card can be back to you in one piece. You don’t need to very familiar with computer operation or have any experience in using data recovery software. Even if you are a computer novice, it is sure that you can easily retrieve the files following the above steps.
If you want to use UnCutData Recovery Wizard Free to restore data files, you can get the genuine version via the link below. And you can download the free version to try it before you pay. The free version supports to restore 200 MB data .
After reading this article, you must be no longer worried about the lost cut files. If you have friends who encounter this kind of problem around you and you think the above solution is useful, you can forward this article or share it with them to help them solve the problem as soon as possible.