Synopsis 【Released September 20, 2019 by uncutdata data recovery】
The Hard Disk In My Computer Suddenly Broke Down. How To Find Files Inside?
Do you often have to work with hard drives when using your computer? If so, you must have encountered a hard drive damage. The damage of the hard drive will make the files stored inside lost. If you just want to use the files, it will often make you annoyed.
"After the overtime work of a day, I walked into the house tiredly. I also had to work with the document file in the computer. But the computer found that the D drive could not be opened. There was always an error message. I've tried many times. Shutdown and restart can not work, which makes me more tired, can anyone help me?
In the daily work and life, have you ever experienced such aggravation, and feel a headache? As a tool for storing large amounts of information, the hard disk plays a big role in the work. Let's brief you what will cause damage to the hard disk, you can know more about it.
Physical damage is also known as hardware failure, including these types: overheating, poorly contact to data wire, and shorted control boards. This has happened. It is recommended that you go to a professional service technician to repair your disk as soon as possible.
File system corruption
The method of organizing files on a storage device is determined by the file system used by the operating system. In other words, it's like a network switch to view the data stored on the hard disk partition. If the file system on the internal hard drive is unfortunately damaged, the disk may be inaccessible and the computer may not boot.
If the computer is attacked by a virus, the necessary boot files stored on the internal hard drive may be corrupted or deleted, causing the boot to fail. And viruses can also make useful data or entire disk partitions lost.
Having learned why disk corruption occurs, and then show you how to retrieve files stored on disk in the event of disk corruption.
Best Recovery Solution: Retrieve files by the UnCutData Recovery Wizard Free
UnCutData Recovery Wizard Free is an all-in-one free data recovery software for different loss situations. It can quickly help you recover lost documents due to disk corruption in a few simple steps.
Now let UnCutData Recovery Wizard Free show you through the following specific steps that how it retrieves important documents for you, so that you no longer have to worry about it.
Step 1: Enter the format selection interfere of the software to choose lost data
First of all, please open UnCutData Recovery Wizard Free, which shows the interface for selecting the format of the data.
There are two lines of icons in the interface, which represent different formats. Now, all you need to do is to select the file in the document format. Please check the second icon from the left of the first line.
When the check is done, a small circle with a check mark will appear in the lower right corner of the icon. Please click the “Next” button at the right end, as shown in Figure 4.
Step 2: Select the disk where the copy is originally located.
The interface you enter now is the interface for disk selection. All you need to do is select the disk where the lost data was originally located.
The copy is stored on the D drive. Please select the D drive. After you select it, you can see a small circle with a check mark at the far right of the name row. Click on “Scan” in the upper right corner. The button can be used to scan the disk, as shown in Figure 5.
Step 3: Scan the disk
The scanning process takes a certain amount of time. The length of time is determined by the data stored on your disk. The scanning time will vary depending on the type and size of the data, as shown in 6.
Under normal circumstances, if in your disk memory there is about 2GB file, it takes only a few seconds to complete the scan.
The UnCutData Recovery Wizard Free provides two scan modes, one is the fast scan that is currently being performed, which is faster, but may not find some deep files. But don't worry, there is a deep scan to help you solve the problem of not being able to retrieve the file, but it takes a little longer.
In general, it is recommended that you perform a fast scan before performing a deep scan. The specific operation of the deep scan is explained in the next step.
Step 4: Select a document that you cannot open for recovery
After the scan is completed, you can browse all the files on your D drive through the left side of the interface.
Then you need to traverse the directory, then find your document and select it, then click the "Recover" button in the top right corner, as shown in Figure 7.
If you don't find your copy at this time, don't worry about it. Please click the “Deep Scan” button on the upper part of the interface to re-examine your files more deeply. Please be patient, as shown in Figure 8.
Once the deep scan is completed, find your copy, select it and click the "Recover" button, and you will be able to reopen your document, as shown below.
Through the simple steps above, you can open your document easily. The whole process is simple and clear. Beginners who are not familiar with computer operation can also get started quickly. Those who have not used the data recovery software can easily understand it.
And UnCutData Recovery Wizard Free supports many types of devices, in addition to your computer, as well as hard drives, external disks, micro-cards, CF/SD cards, etc. No matter what situation, what device you use, as long as you lose your document or can't open it, it can solve this problem efficiently for you. The software is flexible and powerful.
Below is a link to the genuine UnCutData Recovery Wizard Free. If you need this software, please click to enter, download and install it. (There is also a free trial version waiting for you to try)
Through this operation guide, you must have mastered the method of recovering lost documents. If you think this article is useful, you can also forward or share it to your friends who need it to help them solve problems.